tnt-1.9.1-531-ptc2-dl5di-1.0.tgz

The current version of the Linux-RMS-Gateway uses the Linux hostmode terminal software TNT to work in Pactor.
TNT uses standard / extended hostmode, it does not support PTC2-special features like scanning.
Therefor the RMS-Pactor-Gateway DA5UDI uses the internal scanner of a PTC2 or PTC2pro to scan several HF channels.

This patched version of TNT allows to read the PTC2-specific hostmode channel 253.
On this channel the PTC2/PTC2pro shows the traffic coming from the transceiver's CAT-port.
With that the actual frequency is shown in the ACK-frame to the set-commands sent by the PTC2-internal scanner.
The datas are in the raw format like coming from the transceiver.

The patch currently supports the Icom-CIV-format, other formats can probably be implemented on request.

The actual frequency is set the the enviroment variable "PTC2QRG" and can be used to start "rmsgw".


Vy 73

Hans, DL5DI